Wood burning fireplace inserts turn an old open hearth into a real heating appliance, and the 36 inch size fits many standard masonry and prefab openings. This page features the Osburn Matrix 1900, a 36 inch wood insert rated at 45,000 BTU. An insert like this sits inside the firebox, closes the opening with a glass door and sends heat into the room rather than up the chimney. Compare the face dimensions, the fit within the opening, the trim requirements and the heat output. Searches often include a blower option, and this unit has a flush mount blower.

1 product

Fitting a 36 inch wood burning insert

The face of the insert must cover the opening, while its body must fit inside it. Measure the front width and height, the rear width and the depth, then compare them with the specification. A stainless steel liner runs from the insert collar to the chimney top, and a surround panel or door overlay closes the gap. Think about the hearth in front of the insert, since a wood unit needs a non-combustible floor protector of the required size. Seasoned firewood, a chimney sweep and an ash bucket are part of owning one. Hire a certified installer who can check the existing flue and make the connections.

How much heat does a 36 inch wood insert produce?

The Matrix 1900 is rated at 45,000 BTU, which can heat a good-sized living area when installed correctly.

Do I need a permit to install a wood insert?

Often yes. Many areas require a permit and inspection. Check with your local building department before you begin.